Quick Setup of PLC5 Ethernet Connection

General These are some notes on how to quickly setup a simple network for use with a PLC-5 Ethernetprocessor. Setup of a SLC5/05 is similar, except that a transceiver is not required. The following hardware/software was used: Allen-Bradley PLC5-40E CentreCOM 210TS 10 Transceiver

DF1 to DH+ Passthru using WinLinx or RSLinx

For OLD Application... SLC 5/04 processors (OS401 and greater) support DF1 to DH+ Passthru. With this feature, you can connect to a 5/04 processor through Channel 0 using the DF1 protocol and access any node on the DH+ network, regardless of the baud rate of the DH+ network. It is also possible to connect a modem to Channel 0 and connect to any node on